BITS

Return to Introduction  Previous page  Next page

 

bits

 

This function block allow you to SET a bit into a 16-bits word. The bit specified by the input BITN (0..15),related to the word assigned to the REFERENCE field, is SE when the EN (Enable) pin is active. The REFERENCE field in the property dialog must contain a valid word address specifier.The ENO output reflects the value applied on the EN pin

 

Property settings

 

Parameter

Description



REFERENCE

The REFERENCE field in the properties must refer to a word in the table. User can use a direct address identificator %Mx or specify a tag-name

 

Net plugs

 

Plug

Description



EN

Enable input

 

 

ENO

Enable output.The ENO output reflects the value applied on the EN pin

 

 

BITN

Bit to set within the word (0..15)

 

 

See also : BITR, BITSR