OUTPUT_R

Return to Introduction  Previous page  Next page

 

output_r

 

OUTPUT_R represents the standard RESET-OUTPUT device in the LADDER  symbology. The associated bit (boolean value), expressed by the REFERENCE, is cleared when the input pin is active.

 

Property settings

 

Parameter

Description



REFERENCE

The REFERENCE field in the properties must refer to a word in the table. User can use a direct address identificator %MXa.b, %QXa.b, %IXa.b or specify a tag-name

 

See also : EINPUT, NCINPUT, ENCINPUT, OUTPUT, EOUTPUT, RELAY