TOF

Return to Introduction  Previous page  Next page

 

IEC / CEI 1131-3 Compliant

 

tof

 

Asserting the input signal IN of this device immediately activates the Q output. At this point, releasing the input IN will start the time elapsing. When the programmed time, applied to the input PT, is elapsed and the input IN is still de-asserted, the Q output become FALSE. This condition will be keeped until the input IN is remains de-asserted.

If the IN input is asserted again before time elapsing, the time counting will be cleared and the Q output remains ON.

The ET output pin reports the current elapsed time.

 

Net plugs

 

Plug

Description



IN

A TRUE condition on this input starts the TOF timer

 

 

PT

To this input user must apply the programmed time. User should use an IDENT object to enter a time constant

 

 

Q

This output become TRUE after an high to low transition on pin IN and if the programmed time is elapsed

 

 

ET

This output reports the current elapsed time

 

See also : TP, TMI, TON, TSQ , IDENT