OUTPUT_I

Return to Introduction  Previous page  Next page

 

output_i

 

OUTPUT_I represents the standard NEGATED-OUTPUT device in the LADDER  symbology. The associated bit (boolean value), expressed by the REFERENCE, is reflects the negated value applied on the on the input pin. .

 

Property settings

 

Parameter

Description



REFERENCE

The REFERENCE field in the properties must refer to a word in the table. User can use a direct address identificator %MXa.b, %QXa.b, %IXa.b or specify a tag-name

 

See also : EINPUT, NCINPUT, ENCINPUT, OUTPUT, EOUTPUT, RELAY