INPUT_N

Return to Introduction  Previous page  Next page

 

input_n

 

INPUT_N represents the standard NEGATIVE-EDGE input device in the LADDER  symbology. If the previous associated bit state was one and the input pin is zero then sets the bit state to one

 

Property settings

 

Parameter

Description



REFERENCE

The REFERENCE field in the properties must refer to a word in the table. User can use a direct address identificator %MXa.b, %QXa.b, %IXa.b or specify a tag-name

 

See also : EINPUT, NCINPUT, ENCINPUT, OUTPUT, EOUTPUT, RELAY