INPUT_P

Return to Introduction  Previous page  Next page

 

input_p

 

INPUT_P represents the standard POSITIVE-EDGE input device in the LADDER  symbology. If the previous associated bit state was zero and the input pin is one then sets the bit state to one

 

Property settings

 

Parameter

Description



REFERENCE

The REFERENCE field in the properties must refer to a word in the table. User can use a direct address identificator %MXa.b, %QXa.b, %IXa.b or specify a tag-name

 

See also : EINPUT, NCINPUT, ENCINPUT, OUTPUT, EOUTPUT, RELAY